欧美人妻偷人精品_视频一区中文字幕日韩专区无删减_99热成人这里只有精品_美女视频黄是免费网址_在线超碰观看互动交流_久久3综合九色综合免费_老板办公室乳摸秘书gif动态图_欧美做暖小视频xo免费_国产亚洲精aa明星在线看_av丝袜一区大片在线观看

可替代DAVS壓力變送器
    PT500-DAVS壓力變送器
    采用純國產感壓芯片;選進的貼片工藝;
    高精度、穩定、數字標定調節、放大集成電路;
    輸出信號4-20mA二線制;
    可替代Hirschmann品牌DAVS系列產品;
    M12一體連接器;

    常用關鍵字:
    DAVS壓力變送器 替代DAVS變送器 替換DAVS變送器
    Hirschmann傳感器 Hirschmann變送器
    產品優勢:

    PT500-DAVS壓力變送器
    采用純國產感壓芯片;選進的貼片工藝;
    高精度、穩定、數字標定調節、放大集成電路;
    輸出信號4-20mA二線制;
    可替代Hirschmann品牌DAVS系列產品;
    M12一體連接器;

    常用關鍵字:
    DAVS壓力變送器  替代DAVS變送器 替換DAVS變送器
    Hirschmann傳感器  Hirschmann變送器


    PT500-DAVS Pressure Transmitter
    It adopts pure domestic pressure sensitive chip and selective placement technology;
    High precision, stable, digital calibration adjustment, amplification integrated circuit;
    Output signal 4-20mA two-wire system;
    It can replace Hirschmann Davs series products;
    M12 integrated connector;

    Common keywords:
    Davs pressure transmitter replaces Davs transmitter replaces Davs transmitter
    Hirschmann sensor Hirschmann transmitter

    芯       片:
    采用純國產感壓芯片;
    選進的貼片工藝;
    零點、滿度,溫補、線性補償;
    高阻抗、高精度、高穩定性;
    100萬次使用壽命以上;

    信號處理及輸出:
    24位ADC采樣處理芯片;
    DSP數字信號調理算法;
    多點性線溫度校準;
    電壓電流過載保護;
    標準工業信號輸出:4-20mA(二線制),0-20mA(三線制),0-5VDC,0-10VDC,0.5-4.5VDC(三線制);
    采用先進的32bit微處理器和24bit ADC

    結       構:
    厚膜結構:深度氬弧焊接,連接彈性材料與過程接頭,強度高,抗沖擊,耐疲勞;
    溥膜結構:激光焊接,連接彈性材料與過程接頭,硅油介質傳遞壓力,響應快,耐疲勞,小量程;
    304/316殼體,強度可靠堅固;
    整體結構小巧,整體尺寸:直徑19X長65mm,過程連接標準G1/4;
    過程連接材料:304或316;

    應      用:
    油壓、水壓、氣壓壓力測量與監控;
    工業/電力/石油/自動化等領域的設備壓力測量;

    Chip:
    Pure domestic pressure sensing chip is used;
    The selected placement process;
    Zero point, fullness, temperature compensation and linear compensation;
    High impedance, high precision and high stability;
    More than 1 million times of service life;

    Signal processing and output:
    24 bit ADC sampling and processing chip;
    DSP digital signal conditioning algorithm;
    Multipoint linear temperature calibration;
    Voltage and current overload protection;
    Standard industrial signal output: 4-20mA (two-wire system), 0-20mA (three wire system), 0-5vdc, 0-10vdc, 0.5-4.5vdc (three wire system);
    Advanced 32 bit microprocessor and 24 bit ADC are adopted

    Structure:
    Thick film structure: deep argon arc welding, connecting elastic material and process joint, high strength, impact resistance and fatigue resistance;
    PU film structure: laser welding, connecting elastic material and process joint, transmitting pressure with silicone oil medium, fast response, fatigue resistance, small range;
    304 / 316 shell, reliable and strong strength;
    The overall size is 19x in diameter and 65mm in length. The process connection standard is G1 / 4;
    Process connection material: 304 or 316;

    Application:
    Measurement and monitoring of oil pressure, water pressure and air pressure;
    Equipment pressure measurement in industrial / power / Petroleum / automation fields;



    應用領域:
    • 智慧城市

    • 油壓系統

    • 冶金設備

    • 石油化工

    規格參數
    PT500-DAVS壓力變送器主要技術參數:

    測量介質:液體、氣體、蒸汽等
    壓力形式:表壓
    量    程:0~60bar;
    0~300bar;
    0~400bar;
    0~600bar;
    綜合精度:±0.1%FS;±0.25%FS;±0.5%FS;
    非 線 性:≤0.25%FS
    重 復 性:≤0.1%FS
    輸出信號:電流型:4~20mA二線制;
    供電電壓:24VDC(9~30VDC)
    壽    命:≥100萬次
    絕緣阻抗:≥1000 MΩ/100VDC
    負載阻抗:電流輸出: ≤800Ω;
    介質溫度:-20~80℃
    環境溫度:-40~70℃
    補償溫度:0~70℃
    響應時間:≤5mS
    過載壓力:150%FS
    破壞壓力:3倍量程(量程小于40MPa);2倍量程(量程大于41MPa)
    電氣連接:防水緊線螺母直接出線,可配套防爆電氣連接
    防護等級:IP68
    連接電纜:M12航連接器
    連接材料:304/316L

    過程連接:G1/4




    Main technical parameters of pt500-davs pressure transmitter:

    Measuring medium: liquid, gas, steam, etc
    Pressure form: gauge pressure
    Range: 0~60bar;
    0~300bar;
    0~400bar;
    0~600bar;
    Comprehensive accuracy: ± 0.1% FS; ± 0.25% FS; ± 0.5% FS;
    Nonlinearity: ≤ 0.25% FS
    Repeatability: ≤ 0.1% FS
    Output signal: current type: 4-20mA two-wire system;
    Power supply voltage: 24 VDC (9 ~ 30 VDC)
    Service life: ≥ 1 million times
    Insulation impedance: ≥ 1000 m Ω / 100VDC
    Load impedance: current output: ≤ 800 Ω;
    Medium temperature: - 20 ~ 80 ℃
    Ambient temperature: - 40 ~ 70 ℃
    Compensation temperature: 0 ~ 70 ℃
    Response time: ≤ 5ms
    Overload pressure: 150% FS
    Failure pressure: 3 times of measuring range (less than 40MPa); 2 times of measuring range (measuring range greater than 41mpa)
    Electrical connection: Waterproof tight wire nut directly leads out, can be matched with explosion-proof electrical connection
    Protection grade: IP68
    Connecting cable: M12 aviation connector
    Connection material: 304 / 316L
    Process connection: G1 / 4

    訂購注意事項
    PT500-DAVS壓力變送器產品訂購注意事項
    1、產品量程選擇:
    為了使產品精度、壽命、穩定性等功能達到最佳效果,產品的量程選擇參照以下公式計算:
    量程 = 系統最大壓力 X (1.2-1.5)倍;
    產品的實際測量壓力范圍,應該在量程范圍的15%-80%;

    2、產品供電及輸出:
    供電范圍的選擇按產品的個輸出規格確定:
    常規4-20mA輸出,直流12-30VDC供電;

    3、用戶要了解產品的測量介質特性:
    介質規格、介質溫度、介質純度(是否含有雜質或顆粒等);

    4、用戶要了解產品的安裝環境及安裝方式:
    室內或室外安裝;
    環境溫度;
    要求的密封等級;
    設備的振動范圍;
    安裝方式:螺紋、法蘭、特殊結構;
    安裝空間是否滿足產品外形尺寸;


    Precautions for ordering PT500-DAVS products
    1. Product range selection:
    In order to achieve the best effect of product accuracy, life, stability and other functions, the range selection of the product is calculated by referring to the following formula:
    Range = x (1.2-1.5) times of the maximum system pressure;
    The actual measuring pressure range of the product should be 15% - 80% of the range;

    2. Product power supply and output:
    The selection of power supply range is determined according to the output specifications of the product:
    Conventional 4-20mA output, DC 12-30vdc power supply;

    3. The user should understand the measurement medium characteristics of the product:
    Medium specification, medium temperature, medium purity (whether containing impurities or particles, etc.);

    4. Users should understand the installation environment and installation method of the product:
    Indoor or outdoor installation;
    Ambient temperature;
    Required sealing level;
    Vibration range of equipment;
    Installation method: thread, flange, special structure;
    Whether the installation space meets the overall dimension of the product;

    使用注意事項
    產品供電范圍,9-30VDC;
    嚴禁使用硬物(如:螺絲刀、手指、鐵釘?shù)龋┤ナ沟脡毫δて軌毫y量輸出;
    電源和信號線按訂購產品規格要求,正確接線;
    產品安裝時,受力部位為“過程連接六方扳手位”,扳手規格與六方相對應;
    嚴禁被測系統的介質溫度、壓力量程、激勵電壓超過變送器的額定使用范圍;
    注意保護變送器引出電纜,現場使用跨度過大時,建議使用金屬管保護或架空;
    壓力變送器屬精密計量儀器,切勿強加沖擊、摔打,以免損壞芯體
    產品安裝于通風、干燥、無強腐蝕環境,露天安裝加防護裝置,避免陽光直接照射;
    產品儀表嚴禁進水/漏水/泡水情況,露天安裝加防護裝置,避免陽光直接照射;

    Product power supply range, 9-30vdc ;
    It is strictly prohibited to use hard objects (such as screwdriver, finger, iron nail, etc.) to make the pressure diaphragm output under pressure measurement;
    The power and signal wires shall be correctly wired according to the specifications of the ordered products;
    During product installation, the stressed part is "process connection hexagon wrench position", and the wrench specification corresponds to hexagon;
    It is strictly prohibited that the medium temperature, pressure range and excitation voltage of the tested system exceed the rated use range of the transmitter;
    Pay attention to protect the outgoing cable of the transmitter. When the span is too large on site, it is recommended to use metal pipe for protection or overhead;
    The pressure transmitter is a precision measuring instrument. Do not impose impact or smash to avoid damaging the core
    The product is installed in a ventilated, dry and non corrosive environment, and installed in the open with protective devices to avoid direct sunlight;
    It is strictly prohibited to enter / leak / soak water in the product instrument, and protective devices shall be installed in the open to avoid direct sunlight;

    常見問題
    我要提建議
    姓名
    聯系電話
    聯系QQ
    聯系微信
    電子郵箱
    地址
    建議內容
    佛山市普量電子有限公司

    電話:0757-26619568 傳真: 0757-26619508

    24小時在線技術支持:13790092618

    云平臺:www.puliangiot.com

    地址:佛山市順德區容桂街道華口社區華天南一路2號杰森家電智造中心3棟202號

    版權所有©佛山市普量電子有限公司